WLX-893U2IS HDD Docking Station: Where to Buy and How to Contact Customer Service
Wlx 893u2is Driver Download: How to Install and Use the Multi-function HDD Docking Station
Introduction
If you have multiple hard drives lying around and you want to access them easily, you might be interested in a device called Wlx 893u2is. It is a multi-function HDD docking station that can support up to three SATA or IDE hard drives at the same time. It also has a card reader, a USB hub, and a one-touch backup (OTB) function. Moreover, it can clone your hard drives without connecting to a computer.
Wlx 893u2is Driver Download
But before you can use this device, you need to download and install the Wlx 893u2is driver on your computer. In this article, we will show you how to do that, as well as how to use the features and functions of this HDD docking station.
What is Wlx 893u2is?
Wlx 893u2is is a model number of a multi-function HDD docking station made by Shen zhen WanLongXin Electronic Technology Co.,LTD. It is also known as WLX-893U2IS or WLX-893U2IS_OTB. It is a device that allows you to connect up to three SATA or IDE hard drives (either 2.5 inch or 3.5 inch) to your computer via USB 2.0 port. It also has a card reader that supports SD, MS, XD, CF, TF, and M2 cards, and a USB hub that provides two extra USB ports.
Why do you need Wlx 893u2is?
There are many reasons why you might need Wlx 893u2is HDD docking station. Here are some of them:
You have multiple hard drives that you want to access or transfer data from.
You want to backup your data from your computer or hard drives with one touch.
You want to clone your hard drives without connecting to a computer.
You want to use your old IDE hard drives with your new computer.
You want to expand your storage capacity with external hard drives.
You want to read or write data from various memory cards.
You want to add more USB ports to your computer.
How to download and install Wlx 893u2is driver?
To use Wlx 893u2is HDD docking station with your computer, you need to download and install the driver for it. The driver is a software that allows your computer to communicate with the device. Here are the steps to download and install Wlx 893u2is driver:
Go to the official website of Shen zhen WanLongXin Electronic Technology Co.,LTD.
Click on "Download" on the top menu.
Scroll down and find "WLX-893U2IS_OTB" under "OTB Driver".
Click on "Download" and save the file (AI_OTB (IS611).zip) on your computer.
Unzip the file and run the setup.exe file.
Follow the instructions on the screen to install the driver.
Restart your computer after the installation is complete.
If you have trouble installing the driver from the official website, you can also try downloading it from other sources, such as Spectrum Technologies or iButton. However, make sure that you download the correct driver for your device and operating system.
Features and Functions of Wlx 893u2is
Supports SATA and IDE hard drives
One of the main features of Wlx 893u2is HDD docking station is that it supports both SATA and IDE hard drives. SATA stands for Serial ATA, which is a newer standard for connecting hard drives. IDE stands for Integrated Drive Electronics, which is an older standard for connecting hard drives. Most modern computers use SATA hard drives, while older computers use IDE hard drives.
Wlx 893u2is HDD docking station has three slots for connecting hard drives: one for SATA hard drive, one for IDE hard drive, and one for either SATA or IDE hard drive. You can connect up to three hard drives at the same time, as long as they are compatible with the device. The device supports both 2.5 inch and 3.5 inch hard drives, which are different sizes of hard drives. You can use any combination of SATA and IDE hard drives with this device.
Supports USB 2.0 and OTB functions
Another feature of Wlx 893u2is HDD docking station is that it supports USB 2.0 and OTB functions. USB stands for Universal Serial Bus, which is a standard for connecting devices to computers. OTB stands for One Touch Backup, which is a function that allows you to backup your data from your computer or hard drives with one touch.
Wlx 893u2is HDD docking station has a USB 2.0 port for connecting it to your computer. USB 2.0 is a fast and reliable way of transferring data between devices. You can use this port to access your hard drives or memory cards with your computer.
Wlx 893u2is HDD docking station also has an OTB button for backing up your data with one touch. You can use this button to backup your data from your computer or any of the connected hard drives to another connected hard drive. You can also use this button to restore your data from one connected hard drive to another connected hard drive.
Supports card reader and hub functions
A third feature of Wlx 893u2is HDD docking station is that it supports card reader and hub functions. A card reader is a device that allows you to read or write data from various memory cards. A hub is a device that allows you to add more USB ports to your computer.
Wlx 893u2is HDD docking station has a card reader that supports six types of memory cards: SD, MS, XD, CF, TF, and M2 cards. You can use this card reader to access your photos, videos, music, documents, or other files stored on these memory cards with your computer.
Wlx 893u2is HDD docking station also has a hub that provides two extra USB ports for connecting other devices to your computer. You can use these USB ports to connect devices such as flash drives, keyboards, mice, printers, scanners, cameras, or other USB devices.
Supports offline cloning function
A fourth feature of Wlx 893u2is HDD docking station is that it supports offline cloning function. Offline cloning is a function that allows you to clone your hard drives without connecting them to a computer. Cloning means copying all the data from one hard drive to another hard drive exactly as it is.
Wlx 893u2is HDD docking station has an offline cloning button for cloning your hard drives without connecting them to a computer. You can use this button to clone any of the connected hard drives to another connected hard drive. You can also use this button to verify if the cloning process was successful or not.
HDD Docking Station
How to connect Wlx 893u2is to your computer
To connect Wlx 893u2is HDD docking station to your computer, you need to follow these steps:
Make sure that your computer is turned on and has a USB 2.0 port available.
Make sure that the power switch on the back of the device is turned off.
Connect the power adapter to the device and plug it into a power outlet.
Connect the USB cable to the device and your computer.
Turn on the power switch on the back of the device.
Wait for a few seconds until your computer recognizes the device and installs the driver automatically.
If your computer does not recognize the device or install the driver automatically, you may need to download and install the driver manually from the official website or other sources, as explained in the previous section.
How to access your hard drives with Wlx 893u2is
To access your hard drives with Wlx 893u2is HDD docking station, you need to follow these steps:
Make sure that the device is connected to your computer and turned on.
Insert your hard drive(s) into the appropriate slot(s) on the device. You can insert up to three hard drives at the same time, as long as they are compatible with the device. You can use any combination of SATA and IDE hard drives, either 2.5 inch or 3.5 inch.
Wait for a few seconds until your computer recognizes the hard drive(s) and assigns them a drive letter(s).
Open "My Computer" or "This PC" on your computer and find the drive letter(s) corresponding to your hard drive(s).
Double-click on the drive letter(s) to access your hard drive(s). You can view, copy, delete, or modify your files as you normally do with any other hard drive.
If your computer does not recognize your hard drive(s) or assign them a drive letter(s), you may need to format them or assign them a drive letter manually. To do that, you can use the Disk Management tool on your computer. Here are the steps to use Disk Management:
Right-click on "My Computer" or "This PC" on your computer and select "Manage".
Select "Disk Management" under "Storage".
Find your hard drive(s) in the list of disks. They may be labeled as "Disk 1", "Disk 2", etc.
If your hard drive(s) are not formatted, you will see a message saying "Unallocated" or "Not Initialized". Right-click on the unallocated space and select "New Simple Volume". Follow the instructions on the screen to format your hard drive(s).
If your hard drive(s) are formatted but do not have a drive letter assigned, right-click on the partition and select "Change Drive Letter and Paths". Click on "Add" and choose a drive letter for your hard drive(s).
How to backup your data with Wlx 893u2is OTB function
To backup your data with Wlx 893u2is HDD docking station OTB function, you need to follow these steps:
Make sure that the device is connected to your computer and turned on.
Insert two hard drives into the device: one as the source drive and one as the target drive. The source drive is the one that contains the data you want to backup. The target drive is the one that will receive the backup data. You can use any combination of SATA and IDE hard drives, either 2.5 inch or 3.5 inch.
Wait for a few seconds until your computer recognizes both hard drives and assigns them drive letters.
Open "My Computer" or "This PC" on your computer and find the drive letter corresponding to the source drive.
Select all the files and folders that you want to backup from the source drive and copy them to the target drive. You can also use a backup software to do this automatically.
Alternatively, you can press the OTB button on the front panel of the device to backup all the data from the source drive to the target drive. You will hear a beep sound when the backup process starts and another beep sound when it finishes.
Note: The OTB function will overwrite any existing data on the target drive. Make sure that you have backed up any important data on the target drive before using this function.
How to clone your hard drives with Wlx 893u2is offline cloning function
To clone your hard drives with Wlx 893u2is HDD docking station offline cloning function, you need to follow these steps:
Make sure that the device is not connected to your computer and turned off.
Insert two hard drives into the device: one as the source drive and one as the target drive. The source drive is the one that contains the data you want to clone. The target drive is the one that will receive the cloned data. You can use any combination of SATA and IDE hard drives, either 2.5 inch or 3.5 inch.
The capacity of the target drive must be equal to or larger than the capacity of the source drive. Otherwise, the cloning process will fail.
Turn on the power switch on the back of the device.
Press and hold the offline cloning button for three seconds until you hear a beep sound. The LED lights will flash in sequence from left to right indicating that the cloning process has started.
The cloning process will take some time depending on the size of the source drive. During this time, do not turn off or disconnect the device or remove any of the hard drives.
When the cloning process is complete, you will hear another beep sound and all four LED lights will stay on indicating that the cloning process was successful.
If the cloning process fails, you will hear a long beep sound and all four LED lights will flash rapidly indicating that there was an error.
Turn off the power switch on the back of the device and remove your hard drives.
Note: The offline cloning function will overwrite any existing data on the target drive. Make sure that you have backed up any important data on the target drive before using this function.
Conclusion
the main points
In this article, we have shown you how to download and install Wlx 893u2is driver on your computer, as well as how to use the features and functions of Wlx 893u2is HDD docking station. Wlx 893u2is is a multi-function HDD docking station that can support up to three SATA or IDE hard drives at the same time. It also has a card reader, a USB hub, and a one-touch backup (OTB) function. Moreover, it can clone your hard drives without connecting to a computer.
Call to action
If you are looking for a device that can help you access, backup, or clone your hard drives easily, you should consider getting Wlx 893u2is HDD docking station. It is a versatile and convenient device that can save you time and hassle. You can order it online from various websites or buy it from local stores. To learn more about Wlx 893u2is HDD docking station, you can visit the official website of Shen zhen WanLongXin Electronic Technology Co.,LTD or contact their customer service.
FAQs
Q: What are the system requirements for using Wlx 893u2is HDD docking station?
A: To use Wlx 893u2is HDD docking station with your computer, you need to have a USB 2.0 port available and an operating system that supports USB 2.0 devices. The device is compatible with Windows 2000/XP/Vista/7/8/10 and Mac OS X.
Q: How can I check the status of the offline cloning process?
A: You can check the status of the offline cloning process by looking at the LED lights on the front panel of the device. The LED lights will flash in sequence from left to right indicating the progress of the cloning process. Each LED light represents 25% of the cloning process. When all four LED lights stay on, it means that the cloning process is complete.
Q: What should I do if the offline cloning process fails?
A: If the offline cloning process fails, you will hear a long beep sound and all four LED lights will flash rapidly indicating that there was an error. You should turn off the power switch on the back of the device and remove your hard drives. You should check if your hard drives are compatible with the device and if they have enough capacity. You should also check if your hard drives are in good condition and if they have any bad sectors or errors. You can try to clone your hard drives again after fixing these issues.
Q: Can I use Wlx 893u2is HDD docking station as a standalone device without connecting it to a computer?
A: Yes, you can use Wlx 893u2is HDD docking station as a standalone device without connecting it to a computer. You can use it to clone your hard drives with the offline cloning function. However, you cannot use it to access your hard drives or memory cards without connecting it to a computer.
Q: How can I contact Shen zhen WanLongXin Electronic Technology Co.,LTD for more information or support?
A: You can contact Shen zhen WanLongXin Electronic Technology Co.,LTD for more information or support by visiting their official website or sending them an email at wanlongxin@wanlongxin.com. You can also call them at +86-755-83261869 or fax them at +86-755-83261809.